Installation Methods:
1. Place the panel facedown and choose either the adhesive or double-sided tape method.
Adhesive Method:
1. Apply a generous amount of grab adhesive to the back of the panel.
2. Carefully position the panel on the chosen surface.
3. Check if the panel is straight using a spirit level.
4. If you’re using screws, proceed to the next section.
5. Allow time for the adhesive to set.
Double-Sided Tape Method:
1. Apply double-sided tape evenly across the back of the panel.
2. Position the panel on the desired surface.
3. Ensure the panel is straight using a spirit level.
4. If screws are also being used, proceed to the next section.
Screw Method:
1. If you’re fixing the panel with screws, ensure you have your electric drill and black screws ready.
2. Place the panel against the surface.
3. Use the electric drill to drive screws through the panel and into the backing material.
4. Ensure the panel is securely fastened and straight.
These steps provide a clear and organized way to install panels using adhesive, double-sided tape,
or screws, depending on your preference. Remember to follow safety precautions while using tools and ensure that the panels are installed securely and straight for a professional finish
Post time: Mar-27-2025